DUSTTRAK-DRX

DUSTTRAK DRX Aerosol Monitor 8533 and 8534

The DUSTTRAK™ Aerosol Monitor is a portable,battery-operated laser photometer with real-time mass concentrationreadout and data logging capability. The monitor provides reliableexposure assessment by measuring particle concentrationscorresponding to respirable size, PM10, PM2.5 or PM1.0 sizefractions.

Suitable for clean office settings as well as harsh industrialworkplaces and outdoor applications, the aerosol monitor detectspotential problems with airborne contaminants such as dust, smoke,fumes and mists. The DUSTTRAK aerosol monitor is easy to use. Youcan perform quick spot checks or program the advanced logging modesfor long-term unattended sampling.

 

Model 8520 DUSTTRAK Aerosol Monitor
 

Sensor Type: 90° light scattering
Range: 0.001 to 100 mg/m3 (Calibrated to ISO12103-1, A1 test dust)
Resolution: ±0.1% of reading or ±0.001 mg/m3, whichever is greater
Zero Stability: ±0.001 mg/m3 over 24 hours using 10-second time-constant
Particle Size Range: 0.1 to approximately 10 micrometers
Flow Rate: Adjustable 1.4 to 2.4 l/min (1.7 nominally)
Temperature Coefficient: +0.001 mg/m3 per °C (for variations from temperature at which the DUSTTRAK was zeroed)

Operating
Temperature:
0°C to 50°C
Storage Temperature: -20°C to 60°C
Operating Humidity: 0 to 95% rh (non-condensing)
Time Constant: Adjustable from 1 to 60 seconds
Data Logging: 31,000 data points (21 days of logging once/minute)
Logging Interval: Adjustable from 1 second to 1 hour


Physical
External Dimensions: 221 mm × 150 mm × 87 mm
Instrument Weight: 1,5 kg with batteries
Serial Interface: RS-232 1200 baud

Power
AC: AC adapter (included)
Battery: Four C-size alkaline batteries (included)
Battery Run-time: Alkaline 16 hours

Analog Output Specifications
Analog Output Voltage: 0 to 5 VDC
Analog Output Scaling1:
0 to 100 mg/m3
0 to 10.0 mg/m3
0 to 1.00 mg/m3
0 to 0.100 mg/m3
Output Impedance 0.01 ohm
Maximum Output Current 15 mA

Alarm Output Specifications

Type Non-latching, MOSFET solid state (polarized)2

analog switch

Setpoint Range1: 0.010 to 100 mg/m3

Maximum Voltage: 15 VDC

Maximum Current : 1 Amp

Deadband: -5% of alarm setpoint

Connector: 4-Pin, Mini-DIN connector

 


« Back to list