DT85M - intelligenter Datenlogger mit integriertem Modem
Termékleírás
The dataTaker DT85M is a robust, stand alone, ultra low powerdata logger with an integrated 2G/3G modem that allows it to beused across a wide variety of remote applications.
Automatic Data Delivery
The days of travelling long distances to get your data are over.The DT85M's automatic data delivery features allow you to scheduleyour data to be automatically emailed to your inbox every day,week, month or other time interval. More sophisticated systems canmake use of the automatic data delivery features to send loggeddata to a FTP server.
Alarm conditions can also trigger data delivery or alarmmessages to multiple email addresses or mobile phones.
deTermined Communications
Mobile network outages can occur at any time and can last forminutes or days, however dataTaker have gone to great lengths toensure the reliability of data transmissions. The DT85M canrecognise incomplete downloads and will try again until the entiredata file is transmitted, ensuring no lost data. If the networkdrops your logger, the modem automatically reconnects before thenext scheduled transmission.
If the mobile network has marginal coverage, the DT85M can scanfor alternative networks and select the strongest signal.
Easy to Configure
The DT85M is configured directly in your web browser usingdatataTaker's dEX graphical interface. dEX takes you through theconfiguration of your logger, showing you wiring diagrams andallowing you to decide - in as much or as little detail - how youwant the system to work, suiting both novice and advancedusers.
Using the internal modem you can even re-configure your systemremotely over the internet if required.
Applications include:
-
Weather Stations
Műszaki leírás
Analog Channels
16 analog input channels (expandable to 320*)
Each channel is independent and supports: one isolated
3 wire or 4-wire input, or two isolated 2-wire inputs, or
three common referenced 2-wire inputs.
The following maximums apply:
Two wire with common reference terminal: 48 (expandable
to 960)*
Two wire isolated: 32 (expandable to 640)*
Three and four wire isolated: 16 (expandable to 320)
*Expansion requires optional CEM20.
Fundamental Input Ranges
The fundamental inputs that the DT85M can measure
are voltage, current, resistance and frequency. All other
measurements are derived from these.
Auto-ranging is supported over 3 ranges
Accuracy
Accuracy table above is % of reading ±0.01% of full scale.
Sampling
Integrates over 50/60Hz line period for accuracy and noise
rejection
Maximum sample speed: 25Hz
Effective resolution: 18 bits
Linearity: 0.01%
Common mode rejection: >90dB
Line series mode rejection: >35d
Inputs
Inter-Channel Isolation: 100V (relay switching)
Analog Section Isolation: 100V (opto-isolated)
Input impedance: >100MΩ, 100KΩ (30v range)
Common mode range: ・}3.5V or ・}30V on 30V rang
Sensor Excitation (Supply)
Analog channels: selectable 250μA or 2.5mA precision
current source, 4.5V voltage source, or switched external
supply.
General Purpose: Switchable 12V regulated supply for
powering sensors & accessories (max 150mA).
Switchable 5V regulated supply for powering analog
sensors (max 25mA).
Analog Sensors
Supports a wide range of sensors including, but not limited
to, those listed below. A wide range of sensor scaling and
linearising facilities including polynomials, expressions
and functions.
Thermocouples
Types: B, C, D, E, G, J, K, N, R, S, T
Calibration standard: ITS-90
RTD
Materials supported: Pt, Ni, Cu
Resistance range: 10Ω to 10KΩ
Thermistors
Types: YSI 400xx Series, other types*
Resistance range: <10kΩ*
* Other thermistor types are supported by thermistor scaling and calculated channels.
**Resistance range can be increased with the use of a parallel resistor.
Monolithic Temperature Sensors
Types supported: LM34 - 60, AD590, 592, TMPxx,
LM135, 235, 335
Strain Gauge and Bridge Sensors
Configurations: . , . & full bridge
Excitation: voltage or current
4-20mA Current Loop
Internal 100Ω shunt or external shunt resistor
Digital Channels
Digital Input/Outputs
8 bi-directional channels
Input Type: 8 logic level (max 20/30V)
Output Type: 4 with open drain FET(max: 30V, 100mA),
4 with logic output.
Relay Output
1 latching relay, contacts (max: 30Vdc, 1A)
Counter Channels
Low Speed Counters
8 counters shared with digital inputs.
Low speed counters do not function in sleep mode.
Size: 32 bit
Max count rate: 10 Hz
Dedicated Counter Inputs
7 high speed inputs or 3 phase encoder (quadrature) inputs
Size: 32 bit
Max count rate: 100 kHz
Input type: 5 logic level inputs (max ・}30V), and 2
programmable inputs as either logic level inputs or
sensitive inputs (10mV) for magnetic pick-ups (max ・}10V)
Serial Channels
SDI-12
4 SDI-12 inputs shared with digital channels. Each input
can support up to 10 SDI-12 sensors.
Calculated Channels
Combine values from analog, digital and serial sensors
using expressions involving variables and functions.
Functions: An extensive range of Arithmetic,
Trigonometric, Relational,